Zensui ZC-500α Aquarium Cooler

As this is a high-value item, please read the description carefully.

To prevent fraudulent returns, I will record the serial number and create a video of the packing process from start to finish, including the serial number.
I also plan to mark the item in a way that only I will recognize.
The location of the mark will be disclosed after the transaction is completed.
I kindly ask for your understanding as I aim for a secure transaction.

This item is being sold as I am retiring my 120cm aquarium.
It was purchased on May 26, 2023.
It was used during the summer of the first year, and after that, the aquarium was kept in an air-conditioned environment. While water was circulated, it was used as a supplementary device.
The water circulation hoses that were used will also be included.

I would like to say first come, first served! but as this is an expensive item, I want to avoid any trouble.
I may cancel the order if the buyer has not completed identity verification, has one or more unfortunate ratings, or has fewer than 5 ratings.

The unit was in operation until recently, and as shown in the photos, the cooler lights up and its operation has been confirmed.
It was used with saltwater, but I have drained the saltwater and circulated tap water for a week for a basic cleaning.
There is some water remaining in the intake/outflow parts, but please rest assured as it is tap water.
The outlet for the heater on the back has been used very little, as I used a separate thermostat.

*Regarding Packaging*
The item will be shipped in its original outer box.
It was sent to me in this condition when I purchased it new, so I believe this method is acceptable.
The styrofoam inside is the original from when it was purchased new, but the top piece of styrofoam is cracked in the center, and the accessory parts are placed on it.
There are holes on both sides of the handles so that it can be lifted. I have placed a commercially available trash bag over the main unit for simple waterproofing.
The used intake/outflow hoses are placed on both sides of the main unit.
The intake/outflow port parts cannot be disassembled, and if placed on top, the box could not be closed, so they are placed in a corner of the main unit.
The power plug is covered with plastic.

This is all. Please check the photos for packaging details.
While I have done my best with amateur packaging, only those who understand the above should purchase.

This is a used item, so please refrain from purchasing if you are sensitive.
To prevent fraudulent returns, no returns will be accepted, and all sales are final (no claims, no returns).

Thank you for your understanding!!