Semiconductor Welder, Welder, 100V, Semi-Automatic, 125A, Arc Welder, Gasless Wire

List Price: ￥17,300

[3-in-1 Multi-Function Welder]: The MIG-125T welder is a versatile 3-in-1 machine that can be used for arc welding, flux-cored wire welding, and TIG welding. It's incredibly convenient as it can weld various base metals such as cast iron, mild steel, and stainless steel. Weighing just 3.85kg, this machine is compact, lightweight, and easy to carry.

[Inverter Control Semi-Automatic Welder]: This gasless semi-automatic welder features inverter control for minimal spatter and smooth welds with a clean finish, improving weld quality. It uses automatic wire feeding flux-cored wire, so no gas is required! The original MIG single mode eliminates the need for fine adjustments. The voltage is automatically adjusted while you control the welder's power. It's easy for DIY beginners to use.

[Dual Digital Displays for Current and Voltage]: Features dual digital displays for current and voltage. You can finely adjust the current and voltage separately using the dials, allowing you to weld with optimal power based on wire diameter, metal type, and thickness. With a maximum welding output of 125A, it can reliably weld plates up to approximately 5mm thick.

[For Welding Beginners]: The hot start function allows for quick arc initiation, making it easy for new welders and users to operate. By using genuine flux-cored wire, you can weld mild steel and stainless steel without gas.

[Built-in Forced Air Cooling Fan]: This welder is equipped with overheat protection, overcurrent protection, and overload protection functions. It offers excellent quality and safer use. It can weld normally even at minus 20 degrees Celsius, demonstrating advanced technology and reliable quality. The built-in forced air cooling fan prevents heat-related failures.

[Includes Japanese Instruction Manual]
Note: When MIG welding, approach the weld joint of the base material (workpiece) while holding down the torch trigger. Sparks will not occur if you do not hold down the torch trigger when the torch contacts the weld joint of the base material (workpiece).