Wooden Smartphone Stand - Assembly Required

-----This is a completely handmade item-----

We have created a simple stand for smartphones and tablets using wood. It is made from hardwood laminated wood, making it highly resistant to scratches. It is finished with a fine sander, ensuring a pleasant feel to the touch.

As shown in the image, two pieces are used in combination.
It can be set up at approximately a 60° angle, making it comfortable not only for watching videos but also for operations like transcribing text or swiping.

Additionally, a hole has been made for charging cords, allowing for extended use. Furthermore, the slit at the top is designed to minimize interference with phone rings, freeing you from the frustration of wobbly phones. (Depending on the size and position of the ring.)

It also becomes very compact when disassembled. By passing a hook through the charging cord hole, it can be hung for storage, making tidying up very neat.

While this description is a bit lengthy, we are confident that it reflects the value of the product, and we hope you will understand. Thank you for reading. Please consider purchasing.

《Size》
◎ Per piece scale
Width: 73mm
Height: 150mm
Thickness: 10mm
Slit width: 35mm (Cutout diameter: 40mm)
◎ Assembled scale
Width: 73mm
Depth: 145mm
Ground clearance: 130mm
Tilt angle: 60°
*As this is a handmade item made from natural wood, there will be variations in wood grain and slight errors with each production. Please understand that the above are reference values.

《Materials & Finish》
Wood type: Acacia laminated wood
Surface treatment: #400 belt sander
Coating: Woodworking linseed oil

《Shipping & Packaging》
The item will be shipped via Yu-Packet Post with cushioning and moisture protection using styrofoam sheets and a zip-lock bag.

《Important Notes》
In the initial period after purchase, oil from the coating may seep out from the wood edges due to temperature differences. If it accidentally comes into contact with your mouth, it is a naturally derived oil that is safe to ingest. Please wipe it off with a cloth before use.
Also, the strength of the thinner parts is not very high. It is fine with the weight of a smartphone or the pressure during operation, but it will break with a single strong impact such as a hard tap or stepping on it, so please handle with care.

《Promotions etc.》
#ZoromeNoSugioNoDIYMatsuri
#SmartphoneStand #TabletStand #iPhone
#iPad #Android #galaxy
#Handmade