Room Rack Side Table Red 69×14.5×H48.5 Galvanized DIY

Thank you for viewing. Please be sure to read the profile section for important notes.

■ Set Includes
Main unit
Leg stop bar x 1
Screws and nuts x 4

■ Dimensions (approx./cm)
When assembled: Width 69 x Depth 14.5 x Height 48.5
Total weight: approx. 1.8kg

When folded, the main unit is about 3cm thick.

■ Assembly Instructions
1. Open the legs.
2. Insert the notched part of the leg stop bar into the horizontal board in the middle of the legs and set it. It's easier if you insert one side first, then open the legs and insert the other side.
3. Screw holes are provided on the top board where it overlaps with the back of the legs. Insert the screws and secure them with nuts from underneath.

■ Made of galvanized steel and painted with red acrylic spray. There may be slight variations in color, small bubbles, etc.

■ The top board serves as a flat table, and the leg stop bar functions as a rack.

■ The legs are L-shaped galvanized steel connected to the top board. The contact points with the top board are also L-shaped and secured with screws and nuts, making it quite sturdy. While it may wobble slightly if you place your palm on the top board and shake it, it has a reasonable amount of strength. The screws and nuts at the connection points may loosen over time, so please check them occasionally. If you plan to use it in a fixed, unfolded state, tightening the screws at the leg connection points will provide greater stability.

■ Being galvanized steel, it's not as rigid as steel, but both the top board and the middle shelf have enough strength to support a metal object weighing approximately 10kg (see image).

■ The distance from the bottom edge of the top board skirt to the middle shelf is 22cm, and the distance from the bottom edge of the middle shelf skirt to the floor is 22cm.

■ The legs have a width difference of approximately 5mm between the left and right sides to allow for folding.