TASCAM Model12 (with 128GB SD card)

This is a 12-track recording mixer / DAW controller / USB audio interface.

I purchased it new approximately four years ago and took it outside only once. Otherwise, it has been used indoors (non-smoking, no pets). Usage was infrequent, and I stored it carefully, covering it when not in use. The functions I used worked without any problems.

I believe the unit is in good condition, but since it is a used item, please refrain from purchasing if you are overly concerned about minor details. It has been factory reset and updated to the latest firmware.

To get you started right away, I'm including a 128GB SD card (formatted on the unit and already installed). All included accessories are shown in the photos. The manual has some creases and tears.

I will ship it in the original box, wrapped in air cap. Please note that the original box has a sticker from the retailer, as shown in photo 11. Thank you.

Main specifications (excerpted from the retailer's website)

[Features]
■ 8 XLR microphone inputs (+48V support) / 10 TRS line inputs, Bluetooth 5.0 input, 3.5mm 4-pole TRRS input
■ Bluetooth 5.0 input supports AAC and SBC codecs
■ Ultra HDDA microphone preamps (CH1-6)
■ 1-knob compressor and 3-band EQ on all input modules
■ Equipped with 60mm faders
■ Main and sub stereo outputs, AUX1 and AUX2 mono sends
■ Dual headphone outputs with independent volume and source selection
■ TASCAM FX (effects) included
■ Can record up to 12 tracks and play back 10 tracks on an SD card
■ 12-input / 10-output USB audio interface function (USB-C terminal)
■ DAW control (HUI/MCU protocol emulation) support
■ Dual footswitch (TRS terminal) function assignable for transport, effects ON/OFF control, etc.
■ Built-in metronome function, tap tempo click output
■ MIDI IN/OUT terminals, USB-MIDI interface function, MTC, MIDI clock output, SPP support

[Specifications]
■ External dimensions: 343(W) × 360(H) × 98.8(D)mm (including side panels and protrusions)
■ Weight: 4.3kg